Configure LabVIEW Port Dialog

This dialog allows you to specify or edit the VI Server TCP/IP port that VIPM uses to communicate with your registered LabVIEW version. If you have registered multiple LabVIEW versions with VIPM it is recommended to use a different port address for each LabVIEW version.

Figure 50 - Configure LabVIEW Port Dialog

TCP/IP Port: Enter the port number that is configured in LabVIEW.

Test: Click this button to perform a communication test between VIPM and the LabVIEW version with the defined port number. If LabVIEW is not running, VIPM will open LabVIEW before attempting a connection.

Auto-adjust LabVIEW settings before testing: (Windows Only). This will allow VIPM to attempt to adjust your LabVIEW settings automatically before it performs the test. If you cannot use this feature then you must manually configure LabVIEW to match the required settings before you perform the test.

See: Appendix B: How to manually configure your LabVIEW version to allow VIPM communication., for more information on the manual configuration procedure for your specific version of LabVIEW.